System Requirements - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

1

System requirements

TABLE 2
Function
FCIP Tunnel
Configuration
GigE Ports
Interface
GigE Ports
Route
Non-local
switch ports
display in
zoning tree
Remove
Offline or
Inaccessible
Devices
Zone database
summary print

System requirements

Before you install Web Tools on your workstation, verify that your switches and workstation meet
the Web Tools requirements listed in this chapter.
Web Tools requires any browser that conforms to HTML version 4.0, JavaScript version 1.0, and
Java Plug-in 1.7.0_09 or later.
Brocade has certified and tested Web Tools on the platforms shown in
TABLE 3
Operating System
Windows Server 2008 R2 Standard (64-bit)
Windows Server 2008 Standard
Windows 7 Service Pack 1 (SP1)
Red Hat Enterprise Server 5 Advanced
Platform
SUSE Linux Enterprise Server 10
4
Web Tools functionality moved to Brocade Network Advisor (Continued)
Web Tools 6.1.0
Port Admin Module > GigE
tab
Port Admin Module > GigE
tab
Port Admin Module > GigE
tab
Zone Admin
Switch Admin > DCC
policies
Performance Monitoring
Zone Admin
Zone Admin
Certified and tested platforms
Brocade Network Advisor
Configure > FCIP Tunnel
Configure > FCIP Tunnel
Configure > FCIP Tunnel
Configure > Zoning
Configure > Zoning
Replace/Replace All zone members by
selecting the offline devices from the zone
tree. Offline devices have an unknown
overlay badge with good visibility.
Configure > Zoning
Zoning report for both online and offline
database.
Browser
Internet Explorer 8.0/9.0
Firefox 12.0, Internet Explorer 8.0/9.0
Firefox 12.0, Internet Explorer 8.0/9.0
Firefox 12.0
Firefox 12.0
Comments
Viewing FCIP
tunnels is still
supported in Web
Tools 6.1.1, but
New, Edit Config,
and delete are
only available in
Brocade Network
Advisor.
In Web Tools,
non-local switch
port id/WWN can
be added using
text box.
Table 3.
Web Tools Administrator's Guide
53-1002756-01