Renaming Zones; Cloning Zones - Brocade Communications Systems 8 Administrator's Manual

4. Highlight an element in the Member Selection List that you want to include in your zone, or
5. Click Add Member to add a zone member, or click Remove Member to remove a zone member.
6. Select Zoning Actions > Save Config to save the configuration changes.

Renaming zones

For information on enabling the configuration, refer to
Use the following procedure to change the name of a zone.
1. Open the Zone Administration window as described in
2. Click the Zone tab.
3. Select the zone you want to rename from the Name list.
4. Click Rename.
5. In the Rename a Zone dialog box, enter a new zone name and click OK. The zone is renamed in
6. Select Zoning Actions > Save Config to save the configuration changes.

Cloning zones

To perform clone operations for zoning, the EGM license must be installed on the switch;
otherwise, access to this feature is denied and an error message displays.
The EGM license is required only for 8 Gbps platforms, such as the following:
•
•
•
For non-8 Gbps platforms, all functionalities are available without EGM license.
Use the following procedure to clone a zone configuration.
1. Open the Zone Administration window as described in
2. Click the Zone tab.
3. Select the zone you want to clone from the Name list.
4. Click Clone
5. In the Clone an Existing Zone dialog box, enter a name for the copied zone.
6. Click OK. The selected zone is copied from the Zone Admin buffer.
7.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
highlight an element in the Zone Members list that you want to delete.
The zone is modified in the Zone Admin buffer.
window" on page 121.
the Zone Admin buffer.
Brocade DCX and DCX-4S enterprise-class platforms
Encryption Switch
300, 5300, and 5100 switches
window" on page 121.
Select Zoning Actions > Save Config to save the configuration changes. Because no changes
were made to the effective configuration, you do not need to enable the configuration.
Zoning management
"Enabling zone configurations"
"Opening the Zone Administration
"Opening the Zone Administration
9
on page 134.
129