Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 107

NOTE
For FC8-32E and FC8-48E port blades, the port octet speed combination is Auto or Fixed
8G|4G|2G.
You can change the octet combination for the octet associated with first eight ports of a blade or
switch. The first eight ports are based on the slot port number (or user port number in case of the
Brocade 6510 or Brocade 6520). The octet speed must be set consistently across all members of
the port octet.
NOTE
Changing from one combination to another is disruptive operation. It may cause connected ports to
become No_Sync. The 10 GE license is required in order to set a port to speed 10G.
To configure the Port Octet Speed Combination, perform the following steps.
1. Select the Port Admin tab.
2. Select View > Advanced mode.
3. Select the FC Ports tab.
4. In the FC Ports Explorer, select a port to configure.
5. Click Speed Combination.
6. Select a Speed Combination and click OK.
Web Tools Administrator's Guide
53-1002756-01
FIGURE 18
FC Explorer dialog
The Port Octet Speed Combination dialog displays.
FIGURE 19
Port Octet Speed Combination dialog
Configuring port octet speed combination
5
79