Tabs; Fabric Tree - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

2
Viewing Switch Explorer
•
•
•
•
The Switch Admin GUI preferences that persist are:
•
•
•
•
The Switch Explorer GUI preferences that persists are:
•
The Name Server GUI preferences that persist are:
•
•
The Zone Admin GUI preferences that persist are:
•
•
•
•
•

Tabs

The Switch Explorer provides access to the following three tabs:
•
•
•

Fabric Tree

Fabric Tree under Switch View displays all switches in the fabric, even those that do not have a Web
Tools license. Fabric Tree does not display switches segmented before you opened Web Tools.
Only two types of switch icons display in Fabric Tree; one for a pizza box and one for a chassis. No
platform based icons are supported.
Use the drop-down menu at the top of the Fabric Tree area to view switches in the Fabric Tree by
switch name, IP address, or WWN. You can rest on the cursor over a switch to display the IP
address, current status, and other details of the switch. To manually refresh the status of a switch
within the fabric, right-click the switch in the Fabric Tree and select Refresh.
20
Basic or Advance mode
Last selected tab by the user
Table column sorting
Table column positions
Basic or Advance modes
Last selected tab
Table column sorting
Table column positions
Last selected tab
Table column sorting
Table column positions
Basic Zones
Traffic Isolation Zones
Last selected tab
Table column sorting
Table column positions
Switch View
Port Admin
Name Server—This feature is available with Web Tools and Web Tools with the EGM license.
Name Server information is collected from the selected switch. Refer to
Server entries" on page 50 for more information.
"Displaying the Name
Web Tools Administrator's Guide
53-1002756-01