Activating Auto Sleep; Activating Auto Clear - Kyocera KM-2540 Advanced Operation Manual

System Menu
Note The default setting is 2500 for the 25 cpm model and 3000
for the 30 cpm model.
Change the management code to a value between 0000 - 9999.
Always set to 4 digits.
It is recommended to not set the management code to an easily
guessed number such as 1111 or 1234.
The following settings require the management code to be
entered.
• Default Settings for Copying
• Machine Default
• Printing Reports
• Job Accounting
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Management code change (Change
MGMT code with #) and press [Change #].
3
Use the numeric keys to enter the new management code.
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Activating Auto Sleep

In Auto Sleep mode, the machine automatically switches to Sleep mode
if left idle for a preset period. Enable/disable the use of Auto Sleep mode
here. For further details on Sleep mode, refer to Sleep Mode in Chapter
3 of Operation Guide. The setting items are as follows.
Item Description
Off Do not use Auto Sleep mode.
On Use Auto Sleep mode.
Note If Auto Sleep mode interferes with normal operation, set to
disable Auto Sleep mode. Before disabling Auto Sleep mode, it is
first recommended to try extending the time until Auto Sleep mode
is activated (sleep mode change time).
1
Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2
Press [ ] or [ ] to select Auto sleep and press [Change #].
3
Select [Off] or [On].
4
Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.

Activating Auto Clear

Auto Clear automatically releases various specified setting and returns
to default settings mode after a specified period of time since the last
device operation. Enable/disable the use of Auto Clear here. The setting
items are as follows.
Item Description
Off Do not use Auto Clear.
On Use Auto Clear.
3-21