Auto Error Clear - Kyocera FS-1028MFP Operation Manual

Auto Error Clear

If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto
Error Clear mode, automatically clear the error after a set amount of time elapses.
The following errors are automatically cleared.
Cannot duplex print on this paper.
Send error.
Cannot connect to Authentication Server.
Incorrect account ID. Job is canceled.
Job Accounting restriction exceeded. Cannot print.
Job Accounting restriction exceeded. Cannot scan.
Job not stored. Press [OK].
Job Accounting restriction exceeded. Job is canceled.
Sub address/Polling box limit exceeded. Job is canceled.
Memory is full. Print job cannot be processed completely.
Scanner memory is full. Job is canceled.
Print overrun.
KPDL error.
USB memory error. Job is canceled.
No multi copies. Press [OK].
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to specify the auto error clear setting.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
4 User/Job Account
5
User Property
6 Common Settings
*********************
[ Exit
Common Settings: a b
1
Language
*********************
2
Default Screen
3 Sound
[ Exit
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
]
2
Press the OK key. The Common Settings menu
appears.
]
3
Press the or
press the OK key.
Default Setting (System Menu)
key to select [Timer Setting], and
8
or
8-101