Removing A Dvd (Optical) Drive - Lenovo ThinkServer TD200x Hardware Maintenance Manual
Hardware maintenance manual for td200x
Hide thumbs
Also See for ThinkServer TD200x:
- Hardware maintenance manual (304 pages) ,
- Installation and user manual (246 pages) ,
- Installations- und benutzerhandbuch (246 pages)
Table of Contents
Advertisement
If you have other devices to install or remove, do so now. Otherwise, go to Completing the installation.
Removing a DVD (optical) drive
To remove the DVD drive
1. Read the safety information that begins on page Safety information.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables.
3. Unlock and remove the left-side cover (see Removing the left-side cover).
4. Connect one end of the DVD drive cables to the rear of the DVD drive.
5. Open the bezel (see "Opening the bezel" on page 146).
6. Grasping the blue tabs on each side of the DVD drive, press them inward while you pull the drive
out of the sever.
7. Remove the rails from the DVD drive and save them for future use.
8. If you are instructed to return the DVD drive, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
180
ThinkServer TD200x Hardware Maintenance Manual
1
, do the following:
Advertisement
Table of Contents
