Removing The Optical Drive - Lenovo x3250 m6 Installation And Service Manual

Step 5. Install the hard disk drive into the drive bay.
• For the 2.5-inch drive, slide the release latch
bay until the drive stops.
Figure 34. 2.5-inch simple-swap hard disk drive installation
• For the 3.5-inch drive, slide the release latch
until the drive stops. Then, install a new drive and then reinstall the filler or install the filler directly.
Figure 35. 3.5-inch simple-swap hard disk drive installation
Step 6. Complete the parts replacement. See "Completing the parts replacement" on page 172.
Step 7. Reinstall the security bezel. See "Installing the security bezel" on page 92.

Removing the optical drive

To remove the optical drive, do the following:
Step 1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
Step 2. Remove the security bezel. See "Removing the security bezel" on page 91.
Step 3. Remove the server cover. See "Removing the server cover" on page 88.
106
Lenovo System x3250 M6 Installation and Service Guide
1 to the left. Then, gently push the drive into the
2 to the right and gently push the drive into the bay