Lenovo ThinkServer TD200x Hardware Maintenance Manual page 92

Hardware maintenance manual for td200x
Hide thumbs Also See for ThinkServer TD200x:
Table of Contents

Advertisement

Table 4. DSA messages (continued)
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 8 "Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823" on page 221 to determine
which components are customer replaceable units (CRU) and which components are field replaceable
units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a Trained service technician.
Message
number
Component Test
089-802-xxx
CPU
84
ThinkServer TD200x Hardware Maintenance Manual
State
Description
Aborted System
CPU
Stress Test
resource
availability
error.
Action
1. Turn off and restart the system.
2. Make sure that the DSA code is at the latest
level.
3. Run the test again.
4. Make sure that the system firmware is at the
latest level. The installed firmware level is
shown in the DSA log in the Firmware/VPD
section for this component. For more
information, see Updating the firmware.
5. Run the test again.
6. Turn off and restart the system if necessary
to recover from a hung state.
7. Run the test again.
8. Replace the following components one at a
time, in the order shown, and run this test
again to determine whether the problem has
been solved:
a. (Trained service technician only)
Microprocessor board
b. (Trained service technician only)
Microprocessor
9. If the failure remains, go to the Lenovo Web
site for more troubleshooting information at
http://www.lenovo.com/support.

Advertisement

Table of Contents
loading

Table of Contents