Lenovo ThinkServer TD200x Hardware Maintenance Manual page 215
Hardware maintenance manual for td200x
Hide thumbs
Also See for ThinkServer TD200x:
- Hardware maintenance manual (304 pages) ,
- Installation and user manual (246 pages) ,
- Installations- und benutzerhandbuch (246 pages)
Table of Contents
Advertisement
Attention: Do not touch the thermal grease on the bottom of the heat sink. Touching the thermal
grease will contaminate it. If the thermal grease on the microprocessor or heat sink becomes
contaminated, you must replace it. See Thermal grease for more information.
1
Heat sink flange
2
Microprocessor
3
Release level locking tab
4
Retainer bracket
5
Alignment tab
6
Heat sink release level
7
Notch
9. Lift the microprocessor-release latch to the fully open position (approximately 135° angle); then, lift the
bracket frame and remove the microprocessor from the socket.
.
Chapter 7
Installing optional devices and replacing customer replaceable units
207
Advertisement
Table of Contents
