3. Press the release latch on the power supply
cage.
4. If you are instructed to return the hot-swap power supply, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Installing a hot-swap power supply
If you install or remove a hot-swap power supply, observe the following precautions.
Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with
one of these parts, contact a service technician.
170
ThinkServer TD200x Hardware Maintenance Manual
1
and pull the power supply
2
out of the power-supply