Chapter 7. Installing Optional Devices And Replacing Customer Replaceable Units; Server Components - Lenovo ThinkServer TD200x Hardware Maintenance Manual

Chapter 7. Installing optional devices and replacing customer
replaceable units
Important: Before you install optional hardware, make sure that the server is working correctly. Start the
server, and make sure that the operating system starts, if an operating system is installed. If the server is
not working correctly, see the Diagnostics for diagnostic information.
This chapter provides detailed instructions for installing optional hardware devices in the server.

Server components

The following illustration shows the major components in the server.
1
Cover
2
Rear adapter retention bracket
3
Air baffle
4
Heat sink
5
Microprocessor
6
Heat sink retention bracket
7
DIMMs
8
System board
9
VRM
© Copyright Lenovo 2009, 2010
14
USB cable/EasyLED diagnostics assembly
15
DVD drive
16
Bezel
17
Optical drive bay EMC shield
18
2.5-inch EMC shield
19
2.5-inch hot-swap drive
20
2.5-inch drive cage assembly
21
SAS/SATA 2.5-inch backplane
22
Fan assembly
145