Lenovo ThinkServer TD200x Hardware Maintenance Manual page 63

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a trained service technician.
Running the backup IMM main
application.
Please ensure that the IMM is flashed
with the correct firmware. The IMM
is unable to match its firmware to the
server.
IMM reset was caused by restoring
default values.
IMM clock has been set
from NTP server %1.(%1 =
Lenovo_NTPService.ElementName)
SSL data in the IMM configuration
data is invalid. Clearing configuration
data region and disabling SSL+H25.
Flash of %1 from %2
succeeded for user %3.(%1 =
CIM_ManagedElement.ElementName;
%2 = Web or LegacyCLI; %3
= user ID)
Error The IMM has resorted to
running the backup main
application.
Error The server does not support
the installed IMM firmware
version.
Info The IMM has been reset
because a user has restored
the configuration to its
default settings.
Info The IMM clock has been set
to the date and time that
is provided by the Network
Time Protocol server.
Error There is a problem with the
certificate that has been
imported into the IMM. The
imported certificate must
contain a public key that
corresponds to the key
pair that was previously
generated through the
Generate a New Key
and Certificate Signing
Request link.
Info A user has successfully
updated one of the following
firmware components:
• IMM main application
• IMM boot ROM
• Server firmware
• Diagnostics
• Integrated service
processor
Update the IMM firmware.
Important: Some cluster
solutions require specific code
levels or coordinated code
updates. If the device is part of
a cluster solution, verify that the
latest level of code is supported
for the cluster solution before you
update the code.
Update the IMM firmware to a
version that the server supports.
Important: Some cluster
solutions require specific code
levels or coordinated code
updates. If the device is part of
a cluster solution, verify that the
latest level of code is supported
for the cluster solution before you
update the code.
No action; information only.
No action; information only.
1. Make sure that the certificate
that you are importing is
correct.
2. Try to import the certificate
again.
No action; information only.
.
Chapter 5 Diagnostics
55