14.3.14 Configuring Denial of Service (DoS) Prevention
ROUTER: These commands can be executed when the device is in router mode only.
For details on how to enable router configuration modes, refer to
Purpose
To configure Denial of Service (DoS) prevention, which will protect the router from attacks and
notify administrators via Syslog.
Commands
The commands used to configure DoS prevention are listed below and described in the associated
section as shown:
•
show hostdos
(Section
•
hostdos
(Section
•
clear hostdos-counters
14.3.14.1)
14.3.14.2)
(Section
14.3.14.3)
Security Configuration Command Set
Configuring Denial of Service (DoS) Prevention
Matrix NSA Series Configuration Guide
Section
2.3.3.
14-183