14.3.15.6 clear flowlimit action
Use this command to remove a flow limiting action configuration.
clear flowlimit {action1 | action2} [notify] [drop] [disable] [userport |
serverport | aggregateduser | interswitchlink | unspecified]
Syntax Description
action1 | action2
notify
drop
disable
userport |
serverport |
aggregateduser |
interswitchlink |
unspecified
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
•
•
Example
This example shows how to remove flow limiting action 1 from all port classifications:
Matrix(rw)->clear flowlimit action1
Specifies the configuration to be removed as action 1 or 2.
(Optional) Removes the notify action.
(Optional) Removes the drop action.
(Optional) Removes the disable action.
(Optional) Removes this action configuration from the user
classification port type:
•
•
•
•
•
If not specified, all action types will be removed.
If not specified, the action will be removed from all port classifications.
user port
server port
aggregation port
inter-switch link
unspecified port
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-197