Set Maclock Move - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.9.7

set maclock move

Use this command to move all current first arrival MACs to static entries.
set maclock move port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to move all current first arrival MACs to static entries on fe.1.3:
Matrix(rw)->set maclock move fe.1.3
Specifies the port where all current first arrival MACs
will be moved to static entries. For a detailed description
of possible port_string values, refer to
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring MAC Locking
Section 4.1.1.
14-127