Routing Protocol Configuration Command Set
Configuring OSPF
Table 13-5
Table 13-5 show ip ospf neighbor Output Details
Output
ID
Pri
State
Dead-Int
Address
Interface
13-70 Matrix NSA Series Configuration Guide
provides an explanation of the command output.
What It Displays...
Neighbor's router ID of the OSPF neighbor.
Neighbor's priority over this interface.
Neighbor's OSPF communication state.
Interval (in seconds) this router will wait without receiving a
Hello packet from a neighbor before declaring the neighbor
is down.
Neighbor's IP address.
Neighbor's interface (VLAN).