Show Pwa - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14.3.6.1

show pwa

Use this command to display port web authentication information for one or more ports.
show pwa [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, PWA information will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display PWA information for ge.2.1:
Matrix(rw)->show pwa ge.2.1
PWA Status
PWA IP Address
PWA Protocol
PWA Enhanced Mode
PWA Logo
PWA Guest Networking Status - disabled
PWA Guest Name
PWA Redirect Time
Port
-------- ----------------
ge.2.1
Table 14-3 provides an explanation of the command output.
14-54 Matrix NSA Series Configuration Guide
(Optional) Displays PWA information for specific
port(s).
Mode
foreauthorized
- enabled
- 192.168.62.99
- PAP
- N/A
- enabled
- guest
- N/A
AuthStatus
--------------
disconnected
QuietPeriod MaxReq
----------- ---------
60 16