Enterasys N Standalone (NSA) Series Configuration Manual page 1173

Command Defaults
•
•
Examples
This example shows how to enable the RADIUS client for authenticating with RADIUS server 1 at
IP address 10.1.6.203, UDP authentication port 1812, and an authentication password of
"pwsecret." As previously noted, the "server secret" password entered here must match that already
configured as the Read-Write (rw) password on the RADIUS server
Matrix(rw)->set radius server 1 10.1.6.203 1812 pwsecret
This example shows how to restrict all RADIUS servers to authenticate management access
Matrix(rw)->set radius realm management-access all
This example shows how to set the RADIUS timeout to 5 seconds:
Matrix(rw)->set radius timeout 5
This example shows how to set RADIUS retries to 10:
Matrix(rw)->set radius retries 10
If is not specified, none will be applied.
secret-value
If realm is not specified, any authentication will be allowed.
Security Configuration Command Set
:
Matrix NSA Series Configuration Guide
Configuring RADIUS
only
14-13