Show Maclock - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.9.1

show maclock

Use this command to display the status of MAC locking on one or more ports.
show maclock [port_string]
Syntax Description
port_string
Command Defaults
If port_string is not specified, MAC locking status will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for ge.2.1 through 5:
Matrix(rw)->show maclock ge.2.1-5
MAC locking is globally enabled.
Port Port
Number Status
-------- --------
ge.2.1 enabled
ge.2.2 enabled
ge.2.3 enabled
ge.2.4 enabled
ge.2.5 enabled
Table 14-6 provides an explanation of the command output.
(Optional) Displays MAC locking status for specified
port(s). For a detailed description of possible port_string
values, refer to
Trap Max Static
Status Allocated
-------- ----------
enabled 20
enabled 20
enabled 20
enabled 20
enabled 20
Security Configuration Command Set
Section 4.1.1.
Max FirstArrival
Allocated
----------------
600
600
600
600
600
Matrix NSA Series Configuration Guide
Configuring MAC Locking
Violating
MAC Address
-----------------
00-00-00-00-00-00
00-00-00-00-00-00
00-00-00-00-00-00
00-00-00-00-00-00
00-00-00-00-00-00
14-119