Show Multiauth Station - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Multiple Authentication

14.3.10.8 show multiauth station

Use this command to display multiple authentication station (end user) entries.
show multiauth station [mac address] [port port-string]
Syntax Description
mac address
port port-string
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no options are specified, multiple authentication station entries will be displayed
for all MAC addresses and ports.
Example
This example shows how to display multiple authentication station entries. In this case, two end user
MAC addresses are shown:
Matrix(rw)->show multiauth station
Port
------------ ------------ ------------------------
fe.1.20 mac
fe.2.16 mac
14-142 Matrix NSA Series Configuration Guide
(Optional) Displays multiple authentication station entries
for specific MAC address(es).
(Optional) Displays multiple authentication station entries
for specific port(s).
Address type Address
00-10-a4-9e-24-87
00-b0-d0-e5-0c-d0