Enterasys N Standalone (NSA) Series Configuration Manual page 1210

Security Configuration Command Set
Configuring 802.1X Authentication
•
Examples
This example shows how to reset the 802.1X port control mode to auto on all ports:
Matrix(rw)->clear dot1x auth-config authcontrolled-portcontrol
This example shows how to reset reauthentication control to disabled on ports fe.1.1-3:
Matrix(rw)->clear dot1x auth-config reauthenabled fe.1.1-3
This example shows how to reset the 802.1X quiet period to 60 seconds on ports fe.1.1-3:
Matrix(rw)->clear dot1x auth-config quietperiod fe.1.1-3
14-50 Matrix NSA Series Configuration Guide
If port-string is not specified, parameters will be set on all ports.