Clear Maclock Static - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring MAC Locking

14.3.9.10 clear maclock static

Use this command to reset the number of static MAC addresses allowed per port to the default value
of 20.
clear maclock static port_string
Syntax Description
port_string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset static MAC locking on fe.2.3:
Matrix(rw)->clear maclock static fe.2.3
14-130 Matrix NSA Series Configuration Guide
Specifies the port on which to reset the static MAC
locking limit. For a detailed description of possible
port_string values, refer to Section 4.1.1.