7.2.3
Configuring Quality of Service (QoS)
Purpose
To configure one or more ports with the following Layer 2 switching features:
•
Four priority queues on each port.
•
Programmable scheduling according to weighted round-robin (in percentage of traffic per
queue).
Command Descriptions
The commands to configure the Quality of Service are listed below and described in the associated
section.
•
show port qos
(Section
•
set port qos wrr
7.2.3.1)
(Section
7.2.3.2)
Configuring Quality of Service (QoS)
Matrix E1 Series (1G694-13) Configuration Guide
Port Priority Configuration
7-9