Enterasys N Standalone (NSA) Series Configuration Manual page 1205

Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
•
•
Examples
This example shows how to display the EAPOL port control mode for fe.1.1:
Matrix(rw)->show dot1x auth-config authcontrolled-portcontrol fe.1.1
Port 1: Auth controlled port control:
This example shows how to display the 802.1X quiet period settings for fe.1.1:
Matrix(rw)->show dot1x auth-config quietperiod fe.1.1
Port 1: Quiet period:
This example shows how to display all 802.1X authentication configuration settings for fe.2.24:
Matrix(rw)->show dot1x fe.2.24
Port: fe.2.24
PAE state
Backend auth State
Admin controlled directions
Oper controlled directions
Auth controlled port status
Auth controlled port control
Quiet period
Tx period
Supp Timeout
Server Timeout
Max requests
Reauthentication period
Reauthentication enabled
Key tx enabled
If no parameters are specified, all 802.1X settings will be displayed.
If port-string is not specified, information for all ports will be displayed.
30
Auth-Config:
Security Configuration Command Set
Auto
: Initialize
: Initialize
: Both
: Both
: Unauthorized
: Auto
: 60 seconds
: 30 seconds
: 30 seconds
: 30 seconds
: 2
: 3600 seconds
: FALSE
: FALSE
Matrix NSA Series Configuration Guide
Configuring 802.1X Authentication
14-45