Clear Radius Accounting - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.2.6

clear radius accounting

Use this command to clear RADIUS accounting configuration settings.
clear radius accounting {[server{index | all}] [retries {index | all}] [timeout
{index | all}] [intervalminimum] [updateinterval]}
Syntax Description
server index | all
retries index | all
timeout index | all Resets the timeout to 5 seconds on one or more accounting
intervalminimum Resets the minimum interval to 600 seconds.
updateinterval
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to reset the RADIUS accounting timeout to 5 seconds on all servers:
Matrix(rw)->clear radius accounting timeout all
Clears the configuration on one or more accounting
servers.
Resets the retries to the default value of 2 on one or more
accounting servers.
servers.
Resets the update interval to 1800 seconds.
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring RADIUS
14-19