Show Pwa Session - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.6.21 show pwa session

Use this command to display information about current PWA sessions.
show pwa session [port-string]
Syntax Description
port-string
Command Type
Switch command.
Command Defaults
If port-string is not specified, session information for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display PWA session information:
Matrix(rw)->show pwa session
Port MAC
-------- ----------------- --------------- ------------- ------------ ---------
ge.2.19 00-c0-4f-20-05-4b 172.50.15.121
ge.2.19 00-c0-4f-24-51-70 172.50.15.120
ge.2.19 00-00-f8-78-9c-a7 172.50.15.61
(Optional) Displays PWA session information for
specific port(s). For a detailed description of possible
port-string values, refer to
IP
Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Section
User Duration
pwachap10 0,14:46:55
pwachap1 0,15:43:30
pwachap11 0,14:47:58
Matrix NSA Series Configuration Guide
4.1.1.
Status
active
active
active
14-77