Set Flowlimit - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.15.2 set flowlimit

Use this command to globally enable or disable flow setup throttling.
set flowlimit {enable | disable}
Syntax Description
enable | disable
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to enable FST on Fast Ethernet ports 1-5 in port group 2:
Matrix(rw)->set flowlimit fe.2.1-5 enable
Globally enables or disables FST.
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-191