Show Vlanauthorization - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.3.1

show vlanauthorization

Use this command to display the VLAN Authorization settings.
show vlanauthorization [port-list] | [all]
Syntax Description
port-list
all
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no parameters are specified, all VLAN Authorization configuration information
will be displayed.
Example
This example shows how to display VLAN Authorization configuration information for ports
ge.1.1-3:
Matrix(su)->show vlanauthorization ge.1.1-3
VLAN Authorization Global Status:
VLAN Authorization Table
Port Status
--------------------------------------------------------------
ge.1.1 enabled
ge.1.2 disabled
ge.1.3 enabled
(Optional) Displays the port(s) VLAN Authorization
settings.
(Optional) Displays all port(s) VLAN Authorization
settings.
enabled
:
Admin Egress Oper Egress
untagged untagged
untagged untagged
untagged untagged
Security Configuration Command Set
VLAN ID
4094
none
unknown
Matrix NSA Series Configuration Guide
Configuring RFC 3580
14-21