Show Tacacs Server - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring TACACS+
14.3.4.3

show tacacs server

Use this command to display the current TACACS+ server configuration.
show tacacs server {index | all}
Syntax Description
index
all
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example displays configuration information for all configured TACACS+ servers.
Matrix(ro)->show tacacs server all
TACACS+ Server
--------------
1
2
14-28 Matrix NSA Series Configuration Guide
Display the configuration of the TACACS+ server
identified by index. The value of index can range from 1 to
2,147,483,647.
Display the configuration for all configured TACACS+
servers.
IP Address
---------------
192.168.10.10
192.168.1.116
Port Timeout
----- -------
49 10
49 10
Status
-------
Active
Active