Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14.3.15.1 show flowlimit
Use this command to display flow setup throttling information.
show flowlimit [port [port-string]] [stats [port-string]]
Syntax Description
port port-string
stats port-string
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no optional parameters are specified, detailed flow limiting information will be
displayed for all ports.
Example
This example shows how to display flow limiting information for Fast Ethernet port 1 in port group
2. In this case, it is enabled for FST with an "unspecified" port classification, is currently
operational, and has no FST action assigned:
Matrix(rw)->show flowlimit limit port fe.2.1
Flow setup throttling port configuration:
Port
Class
--------- ------------------ -------- --------------------- ---------- -----
fe.2.1
unspecified
14-190 Matrix NSA Series Configuration Guide
(Optional) Displays flow limiting port settings for one or
all ports.
(Optional) Displays flow limiting statistics for one or all
ports.
State
Status
enabled
operational
Reason
Layer
noAction
L4