Set Macauthentication Reauthperiod - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.7.16 set macauthentication reauthperiod

Use this command to set the MAC reauthentication period (in seconds). This is the time lapse
between attempts to reauthenticate any current MAC address authenticated to a port.
set macauthentication reauthperiod time port-string
Syntax Description
time
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the MAC reauthentication period to 7200 seconds
(2 hours) on ge.2.1 through 5:
Matrix(rw)->set macauthentication reauthperiod 7200 ge.2.1-5
Specifies the number of seconds between reauthentication
attempts. Valid values are 1 - 4294967295.
Specifies the port(s) on which to set the MAC
reauthentication period. For a detailed description of
possible port-string values, refer to
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring MAC Authentication
Section 4.1.1.
14-97