Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14.3.15.4 clear flowlimit limit
Use this command to remove a flow limit configuration.
clear flowlimit {limit1 | limit2} [userport | serverport | aggregateduser |
interswitchlink | unspecified]
Syntax Description
limit1 | limit2
userport |
serverport |
aggregateduser |
interswitchlink |
unspecified
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If not specified, the limit will be removed from all port classification types.
Example
This example shows how to remove flow limit 1 from all port classifications:
Matrix(rw)->clear flowlimit limit1
14-194 Matrix NSA Series Configuration Guide
Specifies the configuration to be removed as limit 1 or 2.
(Optional) Removes this limit configuration from the user
classification port type:
•
user port
•
server port
•
aggregation port
•
inter-switch link
•
unspecified port