Set Pwa Guestpassword - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Port Web Authentication (PWA)

14.3.6.15 set pwa guestpassword

Use this command to set the guest user password for PWA networking. When enhanced mode is
enabled, (as described in
grant network access to guests without established login names and passwords.
set pwa guestpassword
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA guest user password name:
Matrix(rw)->set pwa guestpasword
Guest Password: *********
Retype Guest Password: *********
14-70 Matrix NSA Series Configuration Guide
Section 14.3.6.12) PWA will use this password and the guest user name to