Clear Spantree Spanguard; Show Spantree Spanguardtimeout; Set Spantree Spanguardtimeout - Enterasys D2 D2G124-12P Cli Reference Manual

clear spantree spanguard

clear spantree spanguard
Use this command to reset the status of the Spanning Tree SpanGuard function to disabled.
Syntax
clear spantree spanguard
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the status of the SpanGuard function to disabled:
D2(rw)->clear spantree spanguard

show spantree spanguardtimeout

Use this command to display the Spanning Tree SpanGuard timeout setting.
Syntax
show spantree spanguardtimeout
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the SpanGuard timeout setting:
D2(su)->show spantree spanguardtimeout
Spanguard timeout: 300

set spantree spanguardtimeout

Use this command to set the amount of time (in seconds) an edge port will remain locked by the
SpanGuard function.
6-26 Spanning Tree Configuration