Enterasys D2 D2G124-12P Cli Reference Manual page 150

clear port lacp
Parameters
port port‐string
aadminkey
aportpri
asyspri
aadminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync
| lacpcollect |
lacpdist | lacpdef |
lacpexpire | all
padminsyspri
padminsysid
padminkey
padminportpri
padminport
padminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync
| lacpcollect |
lacpdist | lacpdef |
lacpexpire | all
Defaults
None.
Mode
Switch command, read‐write.
Usage
If you set a port to LACP passive using the command clear port lacp port <port‐string>
aadminstate lacpactive, the command clear port lacp port <port‐string> aadminstate lacptimeout
will also be added to the configuration. If you unset the first command, it will remove the second
command automatically from the configuration file.
Example
This example shows how to clear all link aggregation parameters for port
D2(su)->clear port lacp port ge.3.16
4-46 Port Configuration
Specifies the physical port(s) on which LACP settings will be cleared. For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
Clears a port's actor admin key.
Clears a port's actor port priority.
Clears the port's actor system priority.
Clears a port's specific actor admin state, or all actor admin state(s). For
descriptions of specific states, refer to the set port lacp command ("set
port lacp" on page 4‐44).
Clears the port's default partner priority value.
Clears the port's default partner system ID.
Clears the port's default partner admin key.
Clears the port's default partner port priority.
Deletes a partner port from the LACP configuration.
Clears the port's specific partner admin state, or all partner admin state(s).
ge .3.16: