Configuring Snmp Users, Groups, And Communities; Purpose - Enterasys D2 D2G124-12P Cli Reference Manual

Table 5-19 show snmp counters Output Details (Continued)
Output Field
snmpOutBadValues
snmpOutGenErrs
snmpOutGetRequests
snmpOutGetNexts
snmpOutSetRequests
snmpOutGetResponses
snmpOutTraps
snmpSilentDrops
snmpProxyDrops
usmStatsUnsupportedSec
Levels
usmStatsNotInTimeWindows
usmStatsUnknownUserNames
usmStatsUnknownEngineIDs
usmStatsWrongDigests
usmStatsDecriptionErrors

Configuring SNMP Users, Groups, and Communities

Purpose

To review and configure SNMP users, groups, and v1 and v2 communities. These are defined as
follows:
• User — A person registered in SNMPv3 to access SNMP management.
• Group — A collection of users who share the same SNMP access privileges.
• Community — A name used to authenticate SNMPv1 and v2 users.
Configuring SNMP Users, Groups, and Communities
What It Displays...
Number of SNMP PDUs generated by the SNMP protocol entity with the
value of the error-status field as "badValue."
Number of SNMP PDUs generated by the SNMP protocol entity with the
value of the error-status field as "genErr."
Number of SNMP Get-Request PDUs generated by the SNMP protocol
entity.
Number of SNMP Get-Next PDUs generated by the SNMP protocol
entity.
Number of SNMP Set-Request PDUs generated by the SNMP protocol
entity.
Number of SNMP Get-Response PDUs generated by the SNMP
protocol entity.
Number of SNMP Trap PDUs generated by the SNMP protocol entity.
Number of SNMP Get, Set, or Inform request error messages that were
dropped because the reply was larger than the requestor's maximum
message size.
Number of SNMP Get, Set, or Inform request error messages that were
dropped because the reply was larger than the proxy target's maximum
message size.
Number of packets received by the SNMP engine that were dropped
because they requested a security level that was unknown to the SNMP
engine or otherwise unavailable.
Number of packets received by the SNMP engine that were dropped
because they appeared outside of the authoritative SNMP engine's
window.
Number of packets received by the SNMP engine that were dropped
because they referenced a user that was not known to the SNMP
engine.
Number of packets received by the SNMP engine that were dropped
because they referenced an snmpEngineID that was not known to the
SNMP engine.
Number of packets received by the SNMP engine that were dropped
because they did not contain the expected digest value.
Number of packets received by the SNMP engine that were dropped
because they could not be decrypted.
D-Series CLI Reference 5-7