Commands; Show Rmon Alarm; Show Rmon Alarm Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

show rmon alarm

Commands

For information about...
show rmon alarm
set rmon alarm properties
set rmon alarm status
clear rmon alarm
show rmon alarm
Use this command to display RMON alarm entries. The RMON alarm group periodically takes
statistical samples from RMON variables and compares them with previously configured
thresholds. If the monitored variable crosses a threshold an RMON event is generated.
Syntax
show rmon alarm [index]
Parameters
index
Defaults
If index is not specified, information about all RMON alarm entries will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display RMON alarm entry 3:
D2(rw)->show rmon alarm 3
Index 3
---------------------
Owner
Status
Variable
Sample Type
Interval
Rising Threshold
Rising Event Index
Table 13‐44 provides an explanation of the command output.
Table 13-44 show rmon alarm Output Details
Output Field
Index
Owner
13-8 RMON Configuration
(Optional) Displays RMON alarm entries for a specific entry index ID.
= Manager
= valid
= 1.3.6.1.4.1.5624.1.2.29.1.2.1.0
= delta
= 30
= 1
= 2
What It Displays...
Index number for this alarm entry.
Text string identifying who configured this entry.
Startup Alarm
Value
Falling Threshold
Falling Event Index = 0
Refer to page...
13-8
13-9
13-10
13-11
= rising
= 0
= 0