Set Macauthentication Portreauthenticate; Set Macauthentication Macreauthenticate - Enterasys D2 D2G124-12P Cli Reference Manual

set macauthentication portreauthenticate

Use this command to force an immediate reauthentication of the currently active sessions on one
or more MAC authentication ports.
Syntax
set macauthentication portreauthenticate port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force
D2(su)->set macauthentication portreauthentication ge.2.1-5

set macauthentication macreauthenticate

Use this command to force an immediate reauthentication of a MAC address.
Syntax
set macauthentication macreauthenticate mac-addr
Parameters
mac‐addr
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07
to reauthenticate:
D2(su)->set macauthentication macreauthenticate 00-60-97-b5-4c-07
Specifies MAC authentication port(s) to be reauthenticated. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 4‐1.
ge .2.1 though 5 to reauthenticate:
Specifies the MAC address of the session to reauthenticate.
set macauthentication portreauthenticate
D-Series CLI Reference 15-27