Set Macauthentication Portinitialize - Enterasys D2 D2G124-12P Cli Reference Manual

set macauthentication portinitialize

Parameters
enable | disable
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Usage
Enabling port(s) for MAC authentication requires globally enabling MAC authentication on the
switch as described in "set macauthentication" on page 15‐22, and then enabling it on a port‐by‐
port basis. By default, MAC authentication is globally disabled and disabled on all ports.
Example
This example shows how to enable MAC authentication on
D2(su)->set macauthentication port enable ge.2.1-5
set macauthentication portinitialize
Use this command to force one or more MAC authentication ports to re‐initialize and remove any
currently active sessions on those ports.
Syntax
set macauthentication portinitialize port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force
D2(su)->set macauthentication portinitialize ge.2.1-5
15-24 Security Configuration
Enables or disables MAC authentication.
Specifies port(s) on which to enable or disable MAC authentication. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
Specifies the MAC authentication port(s) to re‐initialize. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 4‐1.
ge .2.1 through 5 to initialize:
ge .2.1 though 5: