Set Gvrp; Show Gvrp Configuration Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

set gvrp

Example
This example shows how to display GARP timer information on ports 1 through 10 in slot 1:
D2(su)->show garp timer ge.1.1-10
Port based GARP Configuration: (Timer units are centiseconds)
Port Number
-----------
ge.1.1
ge.1.2
ge.1.3
ge.1.4
ge.1.5
ge.1.6
ge.1.7
ge.1.8
ge.1.9
ge.1.10
Table 7‐31 provides an explanation of the command output. For details on using the set gvrp
command to enable or disable GVRP, refer to "set gvrp" on page 7‐22. For details on using the set
garp timer command to change default timer values, refer to "set garp timer" on page 7‐23.
Table 7-31 show gvrp configuration Output Details
Output Field
Port Number
Join
Leave
Leaveall
set gvrp
Use this command to enable or disable GVRP globally on the device or on one or more ports.
Syntax
set gvrp {enable | disable} [port-string]
Parameters
disable |
enable
port‐string
Defaults
If port‐string is not specified, GVRP will be disabled or enabled for all ports.
7-22 802.1Q VLAN Configuration
Note: For a functional description of the terms join, leave, and leaveall timers, refer to the
standard IEEE 802.1Q documentation, which is not supplied with this device.
Join
---------- ----------
20
20
20
20
20
20
20
20
20
20
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
Join timer setting.
Leave timer setting.
Leavall timer setting.
Disables or enables GVRP on the device.
(Optional) Disables or enables GVRP on specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax Used in
the CLI" on page 4‐1.
Leave Leaveall
----------
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
CLI" on page 4-1.