Show Policy Rule - Enterasys D2 D2G124-12P Cli Reference Manual

show policy rule

show policy rule
Use this command to display policy classification rule information.
Syntax
show policy rule [all | admin-profile | profile-index] [ether | ipproto |
ipdestsocket | ipsourcesocket | iptos | macdest | macsource | tcpdestport |
tcpsourceport | udpdestport | udpsourceport] [data] [mask mask] [port-string port-
string] [rule-status {active | not-in-service | not-ready}] [storage-type {non-
volatile | volatile}] [vlan vlan] | [drop | forward] [dynamic-pid dynamic-pid]
[cos cos] [admin-pid admin-pid] [-verbose] [usage-list] [display-if-used]
Parameters
all | admin‐
profile | profile‐
index
ether
ipproto
ipdestsocket
ipsourcesocket
iptos
macdest
macsource
tcpdestport
tcpsourceport
udpdestport
udpsourceport
data
mask mask
port‐string port‐
string
rule‐status active
| not‐in‐service |
not‐ready
storage‐type non‐
volatile | volatile
vlan vlan
drop | forward
dynamic‐pid
dynamic‐pid
cos cos
9-6 Policy Classification Configuration
Displays policy classification rules for all profiles, profile ID 0 (admin‐
profile), or for a specific profile index number. Valid values are 1 ‐ 1023.
Displays Ethernet type II rules.
Displays IP protocol field in IP packet rules.
Displays IP destination address rules.
Displays IP source address rules.
Displays Type of Service rules.
Displays MAC destination address rules.
Displays MAC source address rules.
Displays TCP destination port rules.
Displays TCP source port rules.
Displays UDP destination port rules.
Displays UDP source port rules.
Displays rules for a predefined classifier. This value is dependent on the
classification type entered. Refer to Table
classification type.
(Optional) Displays rules for a specific data mask. Refer to Table
valid values for each classification type and data value.
(Optional) Displays rules related to a specific ingress port.
(Optional) Displays rules related to a specific rules status.
(Optional) Displays rules configured for either non‐volatile or volatile
storage.
(Optional) Displays rules for a specific VLAN ID.
Displays rules based on whether matching packets will be dropped or
forwarded.
Displays rules associated with a specific dynamic policy ID.
(Optional) Displays rules for a Class‐of‐Service value.
9‐35 for valid values for each
9‐35 for