Set Vlan Forbidden - Enterasys D2 D2G124-12P Cli Reference Manual

Mode
Switch command, read‐write.
Example
This example shows you how to show VLAN egress information for
all three ports are allowed to transmit VLAN 1 frames as tagged and VLAN 10 frames as
untagged. Both are static VLANs:
D2(su)->show port egress ge.1.1-3
Port
Number
-------------------------------------------------------
ge.1.1
ge.1.1
ge.1.2
ge.1.2
ge.1.3
ge.1.3

set vlan forbidden

Use this command to prevent one or more ports from participating in a VLAN. This setting
instructs the device to ignore dynamic requests (either through GVRP or dynamic egress) for the
port to join the VLAN.
Syntax
set vlan forbidden vlan-id port-string
Parameters
vlan‐id
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows you how to set
D2(su)->set vlan forbidden 6 ge.1.3
Vlan Egress
Id Status
1 tagged
10 untagged
1 tagged
10 untagged
1 tagged
10 untagged
Specifies the VLAN for which to set forbidden port(s).
Specifies the port(s) to set as forbidden for the specified vlan‐id.
ge
Registration
Status
static
static
static
static
static
static
.1.3 to forbidden for VLAN 6:
set vlan forbidden
ge .1.1 through 3. In this case,
D-Series CLI Reference 7-13