Globally Enabling or Disabling Diffserv
Globally Enabling or Disabling Diffserv
Purpose
To globally enable or disable Diffserv on the device.
Command
The command used to globally enable or disable Diffserv on the device is listed below and
described in the associated section as shown.
For information about...
set diffserv adminmode
set diffserv adminmode
Use this command to globally enable or disable Diffserv on the device. By default, this function is
disabled at device startup.
Syntax
set diffserv adminmode {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable Diffserv:
D2(rw)->set diffserv adminmode enable
8-2 Differentiated Services Configuration
Enables or disables Diffserv.
Refer to page...
8‐2