Set Macauthentication; Show Macauthentication Session Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

set macauthentication

Example
This example shows how to display MAC session information:
D2(su)->show macauthentication session
Port
-----
ge.1.2
Table 15‐49 provides an explanation of the command output.
Table 15-49 show macauthentication session Output Details
Output Field
Port
MAC Address
Duration
Reauth Period
Reauthentications
set macauthentication
Use this command to globally enable or disable MAC authentication.
Syntax
set macauthentication {enable | disable}
Parameters
enable | disable
Mode
Switch command, read‐write.
Defaults
None.
Example
This example shows how to globally enable MAC authentication:
D2(su)->set macauthentication enable
15-22 Security Configuration
MAC Address Duration
----------------- ---------- -------------
00:60:97:b5:4c:07 0,00:52:31
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
MAC address associated with the session.
Time this session has been active.
Reauthentication period for this port, set using the set macauthentication
reauthperiod command described in
page 15-28.
Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command described in
macauthentication
Globally enables or disables MAC authentication.
Reauth Period
3600
CLI" on page 4-1.
"set macauthentication
reauthentication" on page 15-26.
Reauthentications
-----------------
disabled
reauthperiod" on
"set