Set Spantree Lp; Commands - Enterasys D2 D2G124-12P Cli Reference Manual

Commands

For information about...

set spantree lp

show spantree lp
clear spantree lp
show spantree lplock
clear spantree lplock
set spantree lpcapablepartner
show spantree lpcapablepartner
clear spantree lpcapablepartner
set spantree lpthreshold
show spantree lpthreshold
clear spantree lpthreshold
set spantree lpwindow
show spantree lpwindow
clear spantree lpwindow
set spantree lptrapenable
show spantree lptrapenable
clear spantree lptrapenable
set spantree disputedbpduthreshold
show spantree disputedbpduthreshold
clear spantree disputedbpduthreshold
show spantree nonforwardingreason
set spantree lp
Use this command to enable or disable the Loop Protect feature per port and optionally, per SID.
The Loop Protect feature is disabled by default. See "Loop Protect" on page 2. for more
information.
Syntax
set spantree lp port-string {enable | disable} [sid sid]
Parameters
port‐string
enable | disable
sid sid
Specifies port(s) on which to enable or disable the Loop Protect feature.
Enables or disables the feature on the specified port.
(Optional) Enables or disables the feature for specific Spanning Tree(s).
Valid values are 0 ‐ 4094. If not specified, SID 0 is assumed.
set spantree lp
Refer to page...
6-39
6-40
6-41
6-41
6-42
6-42
6-43
6-44
6-44
6-45
6-45
6-46
6-46
6-47
6-47
6-48
6-48
6-48
6-49
6-50
6-50
D-Series CLI Reference 6-39