Set Macauthentication Reauthperiod; Clear Macauthentication Reauthperiod - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

set macauthentication reauthperiod

set macauthentication reauthperiod
Use this command to set the MAC reauthentication period (in seconds). This is the time lapse 
between attempts to reauthenticate any current MAC address authenticated to a port.
Syntax
set macauthentication reauthperiod time port-string
Parameters
time
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Usage
Changing the Reauth Period with the set macauthentication reauthperiod command does not 
affect current sessions. New sessions will use the correct period.
Example
This example shows how to set the MAC reauthentication period to 7200 seconds (2 hours) on 
ge
.2.1 through 5:
D2(su)->set macauthentication reauthperiod 7200 ge.2.1-5

clear macauthentication reauthperiod

Use this command to clear the MAC reauthentication period on one or more ports.
Syntax
clear macauthentication reauthperiod [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, the reauthentication period will be cleared on all ports.
Mode
Switch command, read‐write.
15-28 Security Configuration
Specifies the number of seconds between reauthentication attempts. Valid 
values are 1 ‐ 4294967295.
Specifies the port(s) on which to set the MAC reauthentication period. For a 
detailed description of possible port‐string values, refer to "Port String 
Syntax Used in the CLI" on page 4‐1. 
(Optional) Clears the MAC reauthentication period on specific port(s). For a 
detailed description of possible port‐string values, refer to "Port String 
Syntax Used in the CLI" on page 4‐1. 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents