Statistics Group Commands; Purpose; Commands; Show Rmon Stats - Enterasys D2 D2G124-12P Cli Reference Manual

Statistics Group Commands

Purpose

To display, configure, and clear RMON statistics.

Commands

For information about...

show rmon stats

set rmon stats
clear rmon stats
show rmon stats
Use this command to display RMON statistics measured for one or more ports.
Syntax
show rmon stats [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, RMON stats will be displayed for all ports.
Mode
Switch command, read‐only.
Note: Due to hardware limitations, the only frame error counted is oversized frames.
(Optional) Displays RMON statistics for specific port(s).
Statistics Group Commands
Refer to page...
13-3
13-4
13-5
D-Series CLI Reference 13-3