Delta BLD-E1 Series User Manual page 98

when the drive is running and OFF when the drive is stop; if multi-function output terminal is
set to opposite direction, Relay will be OFF when the drive is running and ON when the drive
is stop.
Reserved
02-24
Desired Frequency Attained 1
02-25
Control
VF VFPG
mode
The Width of the Desired Frequency Attained 1
02-26
Control
VF VFPG
mode
Desired Frequency Attained 2
02-27
Control
VF VFPG
mode
The Width of the Desired Frequency Attained 2
02-28
Control
VF VFPG
mode
Settings
Once output frequency reaches desired frequency and the corresponding multi-function
output terminal is set to 3 or 4 (Pr.02-11~Pr.02-22), this multi-function output terminal will be
ON.
Revision May 2009, 00DE, V0.50
MO2 MO1
FOCPM
FOCPM
FOCPM
FOCPM
0.00 ~ 4800rpm
Chapter 4 Parameters| BLD-E1 Series
Bit 1 Bit 0
Factory setting: 0
Factory setting: 24
Factory setting: 0
Factory setting: 24
4-57