Table of Contents
Advertisement
Digital inputs (MI1~MI6, DCM)
When using contacts to control the digital inputs, please use high quality components to
avoid contact bounce.
Digital outputs (MO1, MO2, MCM)
Make sure to connect the digital outputs to the right polarity, see wiring diagrams.
When connecting a relay to the digital outputs, connect a surge absorber or fly-back diode
across the coil and check the polarity.
Revision May 2009, 00DE, V0.50
Chapter 2 Installation and Wiring| BLD-E1 Series
2-13
Advertisement
Table of Contents
